2016年10月28日星期五

What are the cause of the pump not flow water?

 Shanghai weihu pump industry to provide users with the pump maintenance encountered in the process of various types of failures, specifically today there is not the cause of the water pump? In the past we also encountered many pump without water, so we have what are not the cause of the water pump as a summary, said below mentioned possible reasons one by one.
A, suction side issues
1, and there is no water injection pump
2, water pump or suction tube is not completely filled with liquid
3, suction head is too high, more than the pump capacity
4, suction pressure is too close to the liquid pressure gasification
5, air pockets in the suction side
6, suction side not fully immersed in a liquid
Second, the system reason
1, the speed is too low
2, motor turning right
3, total head above water pump design head
4, improper operation
Second, the mechanical reason
The impeller is influenced by external factors.
Above is a summary of what are not the cause of the water pump, of course, there could be other reasons, so much the cause of water pump water not may appear a few projects at the same time coexist,  weihu special remind what kind of reason is specific to on site need to be given, to ensure accurate quickly remove the water pump is not a failure.

Submersible pump failure phenomenon and elimination method

1, check the motor. To see if the motor has to check motor starting not starting to eliminate circuit fault can be  whether motor wiring connection correct check whether electric pump reverse electric pump reversal switch power supply cord.
2, check the line. Look after the road if there is a wall, rupture, filter water blockage. If the pipeline rupture should be repair welding or in tube unclog fault can be ruled out.
3, check the pump casing seal check whether the impeller is damaged. Elimination method  change the new seal, impeller.
Second, the motor can't start with hum
1, check whether a motor circuit breakers check whether the voltage is the voltage is too low. After repair, adjust voltage normal fault can be ruled out.
2, check whether there is foreign body inside the impeller, the bearing damage to remove foreign bodies or replace the bearing.
Three, current is too large, ammeter pointer swing
1, when buying a new pump for shaft bending, bearing different heart immediately get back the sales department or factory.
2, check whether the thrust bearing is badly worn impeller with ring friction marks. Elimination method replace the thrust bearing and thrust plate of the impeller rotates with sealing ring friction can no longer.
3, check the shaft and the shaft when relative rotation is flexible rotation is not flexible, should replace or repair the bearings.
4, dynamic water level dropped to below inlet. Traffic shall be reduced or in the well.
Four, severe vibration unit operation
1, check whether the connecting bolt is loose bolts should be tightened.
2, a motor rotor imbalance, imbalance of water pump impeller, motor or the pump shaft bending failure should be sent after the factory for processing.

Water pump overhaul time, pump overhaul period

Water pump overhaul time, pump overhaul period
Water pump overhaul period according to the operation and technical conditions to determine of the unit. SL255-2000 "pumping technology management discipline" regulation for pump overhaul cycle: the main pump for 3 to 5 years or run a 2500-15000 hours, the main motor 3 to 8 years or run a 3000-20000 hours. And according to the situation in advance or delay the overhaul.
When determining pump overhaul cycle and workload, attention should be paid to the following aspects:
(1) if there are no special requirements, avoid removing technology can good parts and institutions.
(2) should try to extend the repair cycle. According to the wear and tear of spare parts, the operation test of similar equipment, equipment runtime performance indicators to determine the pump overhaul period, regardless of the wear of some parts. Therefore, should have a plan to overhaul, in order to ensure the normal operation of the unit.
(3) avoid remove all parts of the body, especially the precision and smoothness, cooperate with the parts, which need high institutions.

The advantage of the sewage plant using sewage pump parsing

Sewage plant for processing production using sewage submersible pump, can will get the robustness of the play, the effect of water treatment is mainly manifested in the following two benefits:
First, strong corrosion resistance
This kind of wastewater treatment will inevitably encounter strong acidic or alkaline substances exist, when the use of this kind of submersible pump will change in the resistance to corrosive effect, because of that it is making more friends to realize its special performance.
Sewage submersible pump in pollution resistance on the performance of the obtained the effective processing and change, have the opportunity to know and see, bring more friends very good effect.
Second, prevent plugging ability
Because the sewage submersible pump itself requires water processing and processing, so also increased on the ability of anti clogging. Use of such materials for promotion and application, let more people to realize the existence of its dominant role. Because there will be a lot of garbage composition of sewage, will inevitably affect the normal water effect to prevent clogging submersible pump at this point if you can choose to come to production and processing, believe that will reach the ideal mode in effect.

Pump selection principles and steps

Pump is a kind of a lot of wide range of general-purpose machinery and equipment, it is widely used in petroleum, chemical, electric power, metallurgy, mining, choose ship, light industry, agriculture, civil and defense departments, occupies an important position in national economy. According to 79 statistics, pump output reached 1.256 million units in China. Pump power consumption accounted for more than 21% of the national power consumption. So vigorously reduce pump energy consumption, to save energy use is of great significance.
Designed and developed in recent years, we have pump industry a lot of high efficiency and energy saving products, such as IHF, CQB, such as the FSB, UHB models of pump products, to reduce the energy consumption of the pump plays a positive role. But now in various fields of national economy, due to the unreasonable type selection, many of the running status of pump in the unreasonable operation efficiency is low, waste a lot of energy. And due to the unreasonable selection of pump, it was impossible to use, or use the maintenance cost increases, the economic benefit is low. Therefore, reasonable choose pump is of great significance to save energy.
So-called reasonable selected pump, is to consider investment and operation cost of pump unit and pumping stations comprehensive technical and economic indexes, such as make it conform to the principle of economy, safety and applicable. In particular, has the following several aspects:
Must meet the requirements of the use of flow and head, requiring the pump running work time points (device characteristic curves with the pump performance curve intersection) often remain within the range of efficient operation, save power and not easy attaint parts.
The choice of the pump should not only small volume, light weight, cheap, and has good characteristics and higher efficiency.
Has good resistance to cavitation performance, this can not only reduce the pump room of the excavation depth, and the water pump cavitation occurs, smooth operation, long service life.
Built according to the selected pump pumping station, the project less investment, low operating cost.
The second section selection steps
A basic data, list:
1, the characteristics of the medium: the name of the medium, specific gravity, viscosity, corrosive, toxic, etc.
In 2, medium contained in the body of particle diameter, how much content.
3, medium temperature (℃)
4, need traffic
General industrial pump can be ignored in the process of pipeline system leakage, but affected by the change of flow must be considered. Agricultural use, if is adopted, open channel water pump must also consider leakage and evaporation.
5, pressure: suction tank pressure, water pressure, the pressure drop of pipeline system (head losses).
6, pipeline system data (diameter, length, kinds and number of pipeline accessories, vacuum pressure to the pool geometry level, etc.).
Should also make the device characteristic curve, if necessary.
Decorate in the design line, should pay attention to the following items:
A, reasonable choose pipe diameter, pipe diameter is big, under the same flow rate, liquid flow velocity is small, small resistance loss, but the price is high, the pipe diameter is small, can lead to resistance losses increase sharply, increase the selected pump lift, installed with power increasing, the cost and operation cost are increased. So from the perspective of technical and economic comprehensive consideration.
B, discharge pipe and pipe joints should be considered are the biggest pressure.
C, pipeline layout should decorate straight pipe as far as possible, try to reduce the attachment and try to narrow the pipe length, pipe must turn, elbow bend radius should be 3 ~ 5 times the diameter of the pipe, as much as possible Angle is greater than 90 ℃.
D, the discharge side of the pump must be installed with the valve (ball valve or valve, etc.) and check valve. Used to adjust the point of pump, valve check valve when the fluid flow reversal can prevent the pump inversion, and makes the pump to avoid water hammer blow. (when the liquid flow back, will produce a great reverse pressure, make the pump damage)
Second, determine the flow head
The determination of traffic
A, if the production process has been given minimum, normal and maximum flow rate, should be taken into account by the maximum flow.
B, if give only normal flow in the production process, should consider to have a certain margin.
For ns >; 100 large capacity low the unpreparedness head pump, flow take 5% allowance, ns <; 50 small flow and pump, the flow take 10% allowance, 50 ns pump of 100 or less, or less traffic allowance is 5%, the pump of the inferior quality and operating conditions, traffic allowance shall be 10%.
C, if the basic data only to weight rate, should be converted to volume flow.

2016年10月27日星期四

Pump valve enterprise how to deal with the opportunities of the pump valve market

Pump valve in our country enterprise in the full of a lot of good news in 2016. In addition to the domestic many industrial projects to restart the pump valve is expected to pull the market demand, more conducive to enterprise development of valve of the related policy also helps to break the pump valve industry development continued downturn, to have unlimited business opportunities. So the domestic pump valve enterprises comply with what kind of attitude, look for the industry development direction and get a bigger development?
Adhere to the concept of the development of technology, production can not shake. As is known to all, pump valve products in the process of the industrial development of our country occupies the extremely important status, the basis of its in the development of China's industrial economy has an irreplaceable role. So keep the healthy development of this industry has very important practical significance. And technology optimization, the road to improve product core competitiveness is the Chinese pump valve enterprise win the market, constantly big key to stride forward. According to statistics from CNPV alliance, pump valve enterprises on technology, every year must be accounted for more than twenty percent of annual revenue to ensure the scientific and reasonable development operation, in which technological factors of importance is self-evident.
While maintaining the development of small and medium-sized enterprises scale, try to go the way of large pump valve enterprise development into the trend of The Times. Competition is actually a competition in power market. For the pump valve enterprises in our country, mostly in small and medium-sized management present situation, difficult to form their own fist project in the market competition and advantage. So how to integrate the existing resources, how to put the scattered go offered in large group enterprises, big industry development way, is that we control the market, the key to grab more profit. In our country, according to CNPV union especially coastal zhejiang, Shanghai, has begun to try to carry on the comprehensive utilization of resources, scale development pattern, and good results have been achieved.
Competition awareness, adhere to the scientific marketing development. In the current context of the global economic recovery, and how to seize the development opportunity, how to improve the consciousness of competition decides the pump valve enterprise can obtain the key to long-term development. Think about CNPV alliance, the improvement of the pump valve domestic enterprises should start from the sales way, the use of marketing channels and market according to the actual needs of all-round ready to adhere to the scientific way to develop marketing to better meet the needs of the development of pump valve market. In addition to this our ready to deal with domestic market competition, more ready to cope with foreign monk "invasion".
So in front of the pump valve market is full of unlimited business opportunities, but whether the enterprise to take the scientific and reasonable measures, whether to have a positive attitude to deal with, decide the enterprise the key to seize business opportunities.

Sewage pump used in everyday life

Pumps are widely used in our daily life, whether professional or our daily life, pump are constantly in operation. Pump is a kind of machine is mainly used to transport the liquid, such as oil, water, acid alkali solution, emulsion, suspending liquid and liquid metal, the pump at the same time can also transport a mixture of gas and liquid. Thus, pump plays an indispensable role in life. There are several kinds of pump, and our life is closely related to the way the sewage pump, as the name suggests, the sewage pumps are mainly used to transport sewage, waste and contain fiber and other solid particles in the liquid medium, is closely related to human life. But due to the sewage pump to transport the liquid containing a large number of impurities, so the pipeline also relative to the other pump is easy to jam, once the pipes are blocked, urban sewage will not go out, the great influence to urban life and the environment. Blocking resistance, therefore, become the important measure of a sewage pump quality or not. At present is mainly applied in the sewage pump sewage submersible pump, it is a kind of non-clog pump, can enter into the pipe in the wastewater of sewage filter before, let the impurity in the sewage pipeline not easily, so it is widely applied in urban construction. Among them, the mine submersible pump is widely used, it is a kind of displacement is bigger, compressive ability better pumps, so bigger changes in water level and the depth of the water flooded more occasions application. At present, there are all kinds of pumps are a lot of kinds, style, brand, if there is need to install pumps, must choose carefully, to choose cost-effective, economic and durable water pump.