How to reduce the energy consumption of submersible pumps?

How to reduce the energy consumption of submersible pumps?

We all know that in the summer is the peak of water, so the pump on a good maintenance of some, began to use, then in the course of how we like to reduce the energy consumption of wells with submersible pumps?

Here we will explain in detail for you some:

First, the pump surface and pressure water chamber (also known as volute) on the surface rust.

Surface corrosion bumps will reduce the pump water 7% -8%; maintenance only steel brush and iron sandpaper or grinding wheel smooth, you can make it in the work of fuel consumption or power consumption reduced by 9% -14%.

Second, the seal ring gap increases

According to the test when the impeller radius in the direction of the gap increased by 4 mm, the pump water will be reduced by 10%; maintenance only with organic adhesive plus asbestos back to the factory-defined gap, you can make the pump fuel consumption at work or electricity Consumption reduced by 10% -12%.

Third, the pressure chamber and impeller axis does not coincide

When the pressure chamber and the impeller axis deviation of 2 mm or more than 2 degrees, the pump water will be reduced by 5% -6%; maintenance only careful measurement, carefully identify the axis coincidence of the location of the installation of a solid, you can make the pump Reduced oil or power consumption by 6% to 7% during operation.