Ten reasons and solutions of Pump lift not enough

Weihu pump industry in the past for the user maintenance encountered problem in the process of water pump is not enough, one of them is water pump lift weihu pump industry pump maintenance technicians here today to simple about the cause and the solution, the pump head is not a lack of enough pump head might mechanical electrical system may also have reasons.

Pump lift is not the cause and the solution

One of the reasons for pump head is not enough, liquid contains excessive amounts of air or gas. Solution: reduce the liquid temperature out of gas.

Pump head is not enough for another, the speed is too low. weihu pump industry solution: check whether the voltage is in the range of rated voltage, check whether the motor running normally.

The cause of the pump head is not enough 3, motor turn to right. weihu pump industry solution: because the power of fire against money and zero line, changing a line, the problem is human reason, is generally not easy to appear.

Four of the cause of the pump head is not enough, the total head above water pump design head. Solution: replace the head higher levels of the water pump.

Five of the cause of the pump head is not enough, the concentration of the liquid and the design value. Solution: replace conform to the requirements of the pump.

Six of the cause of the pump head is not enough, the operation flow rate is far lower than the minimum flow. weihu pump industry solution: replace conform to the requirements of the pump.

Seven of the cause of the pump head is not enough, abrasion and ring. Solution: replace the qualified new wear ring.

Eight of the cause of the pump head is not enough, the damage of impeller. Solution: replace the qualified new impeller.

Nine of the cause of the pump head is not enough, resulting in pump head gasket damage caused by internal leak is not enough. Solution: replace the qualified new gasket.

Ten of the cause of the pump head is not enough, sundries mixed in the pump, the impeller and port blocked. Solution: remove the pump clear clutter.